WILO – Centrifugal Pump – DRAIN LP-LPC
Self-priming drainage pump with standard motor for dry well installation – Non-submersible self-priming drainage pump.
Pump used for transportable and stationary dry installation, not submerged. The hydraulic system with a horizontal suction connection and a vertical connection on the discharge side. The wheel used is a Vortex wheel driven by a standard motor. The hydraulics and the motor have a common shaft. A vibration-limiting base guarantees the stability of the assembly.
DRAIN LP
Hydraulics with a horizontal suction connection and a vertical pressure connection. Vortex impellers are the impeller type used. Drive is provided by a standard motor. The hydraulics and motor have a common shaft. Stable installation is carried out using a low-vibration baseplate.
DRAIN LPC 40
Hydraulics with a horizontal suction connection and vertical pressure connection with an integrated nonreturn valve. A multi-channel impeller is used as the impeller. Drive is provided by a standard motor. The hydraulics and motor have a common shaft. Stable installation is carried out using a low-vibration baseplate.
DRAIN LPC 50, LPC 80
Hydraulics with a horizontal suction connection and a vertical pressure connection. A multi-channel impeller is used as the impeller. An inspection opening on the hydraulics facilitates the cleaning of the impeller and the pump housing. Drive is provided by a standard motor. The hydraulics and motor have a common shaft. Stable installation is carried out using a low-vibration baseplate.
Spécifications / Specifications
Wilo-Drain LP
Technical data
- Mains connection: 1~230 V, 50 Hz
- Protection class: IP44
- Fluid temperature: 3 … 35 °C
- Suction and pressure connection: Rp 1½
- Max. suction head: 6 m
Materials
- Pump housing: PP
- Impeller: Brass
- Shaft: 1.4006
- Mechanical seal: C/Cr
- Static gaskets: NBR
- Motor housing: Al
Wilo-Drain LPC
Technical data
- Mains connection: 3~400 V, 50 Hz
- Protection class: IP55
- Fluid temperature: 3 … 80 °C
- Suction and pressure connection:
- LPC 40: R 1½
- LPC 50: G 2
- LPC 80: G 3
- Max. suction head: 7.5 m
LPC 40
- Pump housing: AlSi
- Impeller: EN-GJL-250
- Shaft: 1.4104
- Mechanical seal: C/Al
- Static gaskets: NBR
- Motor housing: Al
LPC 50
- Pump housing: EN-GJL-250
- Impeller: EN-GJL-250
- Shaft: 1.4104
- Mechanical seal: C/Al
- Static gaskets: NBR
- Motor housing: Al
LPC 80
- Pump housing: EN-GJL-250
- Impeller: EN-GJL-250
- Shaft: 1.4104
- Mechanical seal: SiC/SiC
- Static gaskets: NBR
- Motor housing: Al
Courbes / Performance Curve
